Microsoft B4E-00025 Uživatelská příručka stáhnout pdf (Strana 89)

Trimble M3 Total Station User Guide 81

Coordinates 7

70.1 Orientation using known coordinates

When you press [F4] YX in the Backsight Point

screen you can select to input coordinates of the

backsight point.

1. In the

Backsight Point screen, press

[F3] Input to input coordinates of the backsight

point.

2. To sight the backsight by entering coordinates do

one of the following:

– Input the coordinate values directly

–Press

[F3] Stack to select from previously

input values.

–Press

[F4] o.k. to accept new or existing

coordinates.

3. After you have input the coordinates, you can do

one of the following:

– To measure distance and angle, press

[F1].

– To measure angle only, press

[F3].

4. Sight the backsight point and then press

[MEAS/ENT].

Note – To change the point name, point code, or target

height, press .

When you have taken a measurement to the

backsight point, the calculated station

coordinates and orientation appear.

5. Do one of the following:

– To return to the

Backsight Point

screen, press

[F1] No.

– To record the result and complete the

station setup, press

[F4] Yes.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 167 168

Žádné komentáře

Microsoft B4E-00025 Uživatelská příručka Strana 89