Microsoft B4E-00025 Uživatelská příručka Strana 49
- Strana / 168
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Trimble M3 Total Station User Guide 41
Before Going to the Field 3
4. Press [ESC] to return to the HOT MENU screen.
Selecting a point name and point code
1. Press
[5] in the HOT MENU screen to open the
Point number/Point code screen.
2. Do one of the following:
– To change the input mode, press
[F1] <ABC>.
– To select the input from the list, press
[F2] List.
– To select the input from a previously used
point name or code, press
[F3] Stack.
3. Then do one of the following:
– To return to the screen in which you
pressed , press
[F4].
– To return to the
HOT MENU screen, press
[ESC].
Selecting a target configuration
1. Press
[6] in the HOT MENU screen to open the
Set Target screen.
2. Do one of the following:
– To move the cursor in the target list, press
[^]
or [v] or [1] – [5] and then press [MEAS/ENT] to
select the highlighted item.
–Press
[F2] Edit to edit the target settings,
see Editing target settings, page 42.
3. To select the highlighted target, press
[F4] o.k..
Table 3.3 Allowable values for error corrections
Setting Input range
Prism constant -999 – 999 (numeric input)
Temperature -40 °C – 70 °C
Pressure 440 hPa – 1460 hPa
Scale 0.995000 – 1.00500
C&R corr. 0.132, 0.142, 0.200, or OFF
Sea level corr. ON/OFF
- USER GUIDE 3
- Contact Information 4
- Copyright and Trademarks 4
- Release Notice 4
- Safety and Warnings 5
- Warnings and Cautions 6
- Cautions 7
- Contents 10
- Introduction 1 15
- 1 Introduction 16
- System diagram 17
- Related information 17
- Technical assistance 18
- Your comments 18
- In this chapter: 19
- Hardware overview 20
- CLASS 1 LASER PRODUCT 21
- Maintenance 22
- LCD display and key functions 23
- Key functions 24
- Status bar 26
- [6] three times 27
- Software overview 28
- Principles of display 30
- Input screen 31
- Inputting data 32
- 23.2 Stack 33
- 20.1 List 33
- Before Going to the Field 3 35
- Unpacking the instrument 36
- Packing the instrument 36
- Safety notices 36
- Charging the battery pack 38
- Discharging the battery pack 38
- Selecting a language 40
- [ESC]. The instrument will 41
- Instrument settings 42
- Editing target settings 50
- Reviewing stored data 51
- Deleting data 51
- Searching your data 52
- Adding a point name or number 53
- Adding a layer 54
- Setting up the tripod 56
- Centering 56
- Leveling 57
- Focusing the telescope 58
- Measurement with a prism 59
- Turning on the instrument 61
- Turning off the instrument 62
- Sleep mode 62
- Basic Measurement Screen 5 63
- Measurement mode 64
- Changing the screen display 65
- Changing the distance unit 66
- Taking measurements 67
- Setting the station elevation 69
- Bearing-Distance 71
- Corner-Angle 72
- Intersection 73
- Eccentric Object 74
- Job Manager 6 75
- Creating a new job 76
- The job settings are: 77
- Opening an existing job 78
- Deleting a job 78
- Setting the Control Point job 79
- Displaying job information 80
- Editing data 80
- Coordinates 7 81
- Resection 82
- Known Station 87
- Station elevation 91
- Measure topo 91
- Stakeout by reference line 98
- Stakeout by dividing line 99
- Coordinates 7 101
- 7 Coordinates 102
- Applications 8 103
- Connecting distance 104
- Start connecting distances 105
- Remote object height 108
- Station and offset 110
- screen, do one of the 111
- screen, do one of 111
- screen appears 111
- Vertical plane 113
- , press [F2] hSet 114
- [F3] xSet 114
- , press [F4] y 114
- Compute area 115
- Data Transfer 9 117
- Hardware interface 118
- Specifications 119
- XON/XOFF Control 119
- Nikon data fields 121
- Checking and Adjustment 10 123
- Compensator adjustment 128
- Troubleshooting A 131
- Settings interface 132
- Job Manager 132
- Stakeout 133
- Adjustment C&I 134
- Application 134
- Data Formats B 135
- M5 data format 136
- Data Formats B 137
- Explanation of the data line 138
- Special characters 138
- 138
- B Data Formats 140
- Record Settings 141
- Marking in the M5 format 142
- Value blocks 143
- Recording data lines 144
- Nikon data format 148
- Downloading Nikon raw format 149
- Sideshot records 150
- Stakeout records 150
- F1/F2 records 150
- File format 151
- Data example 152
- Specifications C 153
- Telescope 154
- Measurement range 154
- Measurement intervals 155
- Angle measurement 155
- Dual-axis tilt sensor 155
- Clamps/tangent screws 155
- Tribrach 155
- Level vial sensitivity 156
- Optical plummet 156
- Display and keypad 156
- Battery pack BC-65 156
- Environmental performance 157
- Dimensions 157
- C Specifications 158
- Glossary 159
- Glossary of terms 161
Související produkty a manuály pro Směrovače Microsoft B4E-00025
(2 stránky)
(70 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.075 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce