Microsoft PRO 906EX Provozní pokyny

Procházejte online nebo si stáhněte Provozní pokyny pro Tisk a skenování Microsoft PRO 906EX. Microsoft PRO 906EX Operating instructions Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 298
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - General Settings Guide

Operating InstructionsGeneral Settings GuideRead this manual carefully before you use this machine and keep it handy for future reference. For safe a

Strany 2

2DisplayThe display panel shows machine status, error messages, and function menus.The function items displayed serve as selector keys. You can select

Strany 3 - Manuals for This Machine

Tray Paper Settings923❖ Copying Method in Duplex• 2 Sided Copy• 1 Sided Copy❖ Apply Auto Paper Select• Yes•No❖ Thick Paper SettingIf the LCT (A3 / 11”

Strany 4 - ❖ Other manuals

Items of Tray Paper Settings933❖ Slip SheetsYou can specify and display the paper tray in which to set slip sheets. Youcan also specify the display ti

Strany 5 - TABLE OF CONTENTS

Tray Paper Settings943❖ The paper sizes"Auto Detect", "12×18L", "11×17L", "11×15L", "11×14L", "

Strany 6 - 3. Tray Paper Settings

Items of Tray Paper Settings953❖ Back CoverYou can specify and display the paper tray to set back cover sheets. You canalso specify the display time a

Strany 7

Tray Paper Settings963• OHP (Transparency)•Translucent Paper• Preprinted Paper• Prepunched Paper•Tab Stock• Tab Position Shift• Number of Tabs❖ The pa

Strany 8

Items of Tray Paper Settings973❖ The paper sizes utilizing LCIT RT5000 (A4 LCT)If the LCIT RT5000 is utilized, the paper sizes are available as follow

Strany 9 - How to Read This Manual

Tray Paper Settings983❖ Thick Paper Setting•On• Off❖ Designation Sheet 1 - 9You can specify and display the paper tray to set designation sheets. You

Strany 10 - Important

Items of Tray Paper Settings993❖ Tray 5You can sets the display to show the type of paper loaded in each of the tray 5This information is used by the

Strany 11 - B Select the menu

Tray Paper Settings1003❖ The paper types utilizing LCIT RT5010 (A3 LCT)If the LCIT RT5010 is utilized, the paper types are available as follows:•Do no

Strany 12

Items of Tray Paper Settings1013❖ The paper sizes utilizing LCIT RT5010 (A3 LCT)If the LCIT RT5010 is utilized, the paper sizes are available as follo

Strany 13 - A Press the {Counter} key

3Accessing User Tools (System Settings)This section is for Administrators in charge of this machine.User Tools allow you to change or set defaults.Not

Strany 14

Tray Paper Settings1023❖ Designation Sheet 1 - 9You can specify and display the paper tray to set designation sheets. You canalso specify the display

Strany 15 - 1. Connecting the Machine

Items of Tray Paper Settings1033❖ The paper types utilizing LCIT RT5000 (A4 LCT)If the LCIT RT5000 is utilized, the paper types are available as follo

Strany 16 - Connecting the Machine

Tray Paper Settings1043• OHP (Transparency)•Translucent Paper• Preprinted Paper• Prepunched Paper•Tab Stock• Tab Position Shift• Number of Tabs❖ The p

Strany 17 - Connecting to the Interfaces

Items of Tray Paper Settings1053❖ Copying Method in Duplex• 2 Sided Copy• 1 Sided Copy❖ Apply Auto Paper Select• Yes•No❖ Designation Sheet 1 - 9You ca

Strany 18

Tray Paper Settings1063❖ Separation SheetsYou can specify and display the paper tray in which to set slip sheets. Youcan also specify the display time

Strany 19

Items of Tray Paper Settings1073❖ The paper sizes•Metric version: "Auto Detect", "12×18L", "11×17L", "11×81/2K"

Strany 20

Tray Paper Settings1083❖ Designation Sheet 1 - 9You can specify and display the paper tray to set designation sheets. You canalso specify the display

Strany 21 - ZGDH600J

Items of Tray Paper Settings1093❖ The paper sizes•Metric version: "Auto Detect", "12×18L", "11×17L", "11×81/2K"

Strany 22

Tray Paper Settings1103❖ Back CoverYou can specify and display the paper tray to set back cover sheets. You canalso specify the display time and copyi

Strany 23 - Network Settings

Tray Paper Setting on Main and Sub-machines1113Tray Paper Setting on Main and Sub-machinesThis section explains the Tray Paper Setting on the two mach

Strany 24 - IEEE 1394 (IPv4 over 1394)

4D Change settings by following instructions on the display, and then press[OK].Note❒ To cancel changes made to settings and return to the initial dis

Strany 25 - IEEE 802.11b (wireless LAN)

Tray Paper Settings1123❖ Paper Type: Tray 5• The main and sub-machines follow their respective set values.• In combined copying, only the paper tray c

Strany 26 - Ethernet

1134. Copier/Document ServerFeaturesThis chapter describes various items of [Copier/Document Server Features] avail-able in this machine.General Featu

Strany 27

Copier/Document Server Features1144❖ Reserve Job ModeYou can set whether to reset the mode to the initial state or return to the modein use before the

Strany 28

General Features1154❖ TextYou can adjust the edges of finished image.The outline of a character becomes soft when you select "Soft". The out

Strany 29

Copier/Document Server Features1164❖ PhotoYou can adjust the quality of finished images according to the type of photo original.“Printed photo” is set

Strany 30

General Features1174❖ Dark BackgroundYou can set whether "Dark Background" can be selected as an original type.•On• Off❖ Panel Features Defa

Strany 31

Copier/Document Server Features1184❖ Special Original Display DefaultsYou can set up to three items for displaying on the initial display from fiveite

Strany 32

General Features1194❖ Customize Function: CopierA maximum of four often-used functions can be registered to the functionkeys.• Off•Mixed Sizes•Batch•S

Strany 33

Copier/Document Server Features1204Reproduction RatioThis section describes various items of [Reproduction Ratio] under [Copier/Docu-ment Server Featu

Strany 34

Reproduction Ratio1214•Inch version• 25%• 50% (11”×17”→51/2”×81/2”)• 65% (11”×17”→81/2”×11”)• 73% (11”×15”→81/2”×11”)• 78% (81/2”×14”→81/2”×11”)• 85%

Strany 35

5Displaying CounterThis section describes how to display Counter.A Press the {Counter} key.Note❒ You can quit displaying Counter by pressing the {Coun

Strany 36

Copier/Document Server Features1224•Metric version• 25%• 50% (A3→A5, F→A5)• 65% (A3→F)• 71% (A3→A4, A4→A5)• 75% (B4→F4)• 82% (F→A4, B4→A4)• 93%• 115%

Strany 37

Reproduction Ratio1234❖ R/E Ratio PriorityYou can set the ratio with priority when [Reduce / Enlarge] is pressed.•Metric version• 400%• 200%• 141%• 12

Strany 38

Copier/Document Server Features1244EditThis section describes various items of [Edit] under [Copier/Document Server Fea-tures].Default settings are sh

Strany 39

Edit1254❖ Back Margin: Top / BottomYou can specify top and bottom margins on the back side of copies in MarginAdjustment mode.• Top•BottomDefault:•Met

Strany 40

Copier/Document Server Features1264❖ Erase Original Shadow in CombineIn Combine mode, you can specify whether to erase a 3 mm, 0.1" boundarymargi

Strany 41

Edit1274❖ Orientation: Booklet, MagazineYou can select the orientation of copies to open when using Booklet or Mag-azine mode.• Open to Left•Open to R

Strany 42

Copier/Document Server Features1284❖ Double Copies Separation LineYou can select a separation line using the Double Copies function from: None,Solid,

Strany 43

Edit1294• Crop Marks❖ Copy Back CoverWhen copying the back cover, you can specify whether to have the back coveroutside (outside page) or inside (insi

Strany 44

Copier/Document Server Features1304StampThis section describes various items of [Stamp] under [Copier/Document Server Fea-tures].Default settings are

Strany 45

Stamp1314• Norwegian•Danish• Russian•Japanese• Simplified Chinese•Traditional Chinese•Hangul❖ Stamp PriorityYou can select the stamp type given priori

Strany 47

Copier/Document Server Features1324•Stamp PositionYou can adjust the print position of the stamp within the available rangeas shown below.Metric versi

Strany 48

Stamp1334• Page to StampYou can specify whether to print the stamp on all pages or only the firstpage.• All Pages•1st Page Only• Dup. Back Pg. Stamp P

Strany 49

Copier/Document Server Features1344•Stamp PositionYou can adjust the print position of the User Stamp within the availablerange as shown below.Metric

Strany 50

Stamp1354Date StampThis section describes various items of [Date Stamp] under [Stamp].❖ FormatYou can select the date format for Date Stamp mode.• MM/

Strany 51 - 2. System Settings

Copier/Document Server Features1364❖ Stamp SettingYou can specify how Date Stamp is printed.•Stamp PositionYou can specify where to print the Date Sta

Strany 52 - System Settings

Stamp1374• Dup. Back Pg. Stamp Pos.You can adjust the stamp position for back side in duplex mode, within theavailable range as shown below.Metric ver

Strany 53

Copier/Document Server Features1384❖ Page Numbering in CombineYou can set page numbering when using the Combine function and the PageNumbering functio

Strany 54

Stamp1394Inch version:• "Top Left"…T/B: 0.1-5.7”, L/R: 0.1-5.7”• "Top Center"…T/B: 0.1-5.7”, L/R: 2.8-2.8”• "Top Right"…

Strany 55

Copier/Document Server Features1404Stamp TextThis section describes various items of [Stamp Text] under [Stamp].❖ FontYou can select the font in Stamp

Strany 56

Stamp1414•Stamp PositionYou can adjust the print position of the Stamp Text within the availablerange as shown below.Metric version:• "Top Left&q

Strany 57 - Timer Settings

71. Connecting the MachineConnect the machine to the network to configure network environment.Connecting to the InterfacesThis section explains how to

Strany 58

Copier/Document Server Features1424Input/OutputThis section describes various items of [Input/Output] under [Copier/Document Serv-er Features].❖ SADF

Strany 59

Input/Output1434❖ Staple PositionSpecify which Top 2 staples or Bottom shown on the initial display with pri-ority.The optional Finisher AFE, or the B

Strany 60 - Interface Settings

Copier/Document Server Features1444❖ Finisher: Punch TypeSpecify the punch type.The optional Finisher AFE and Multi-hole Punch Unit are required to us

Strany 61

Settings for the Document Server1454Settings for the Document ServerFor details, see "System Settings", and "Copier/Document Server Fea

Strany 62

Copier/Document Server Features1464Copier/Document Server Features on Main and Sub-machinesThis section explains the Copier/Document Server Features o

Strany 63

Copier/Document Server Features on Main and Sub-machines1474❖ Auto Tray Switching• The main and sub-machines follow their respective set values.❖ Text

Strany 64

Copier/Document Server Features1484❖ Special Original Display Default• The main machine follows the values that are set in it. The set values of thesu

Strany 65

Copier/Document Server Features on Main and Sub-machines1494EditHow the defaults in the Edit of copying of the main and sub-machines are usedin combin

Strany 66

Copier/Document Server Features1504❖ Erase Border Width• The main machine follows the values that are set in it. The sub-machinesfollows the settings

Strany 67

Copier/Document Server Features on Main and Sub-machines1514❖ Separation Line in Combine• The main machine follows the values that are set in it. The

Strany 68 - C Press [Print List]

Connecting the Machine81Connecting to the Ethernet InterfaceConnect 10BASE-T or 100BASE-TX cable to the Ethernet interface.Important❒ If the main powe

Strany 69 - F Press the {User Tools} key

Copier/Document Server Features1524❖ Stamp Format• The main machine follows the values that are set in it. The sub-machinesfollows the settings made o

Strany 70 - File Transfer

Copier/Document Server Features on Main and Sub-machines1534❖ Superimpose• The main machine follows the values that are set in it. The sub-machinesfol

Strany 71

Copier/Document Server Features1544❖ Stamp Position• The main machine follows the values that are set in it. The sub-machinesfollows the settings made

Strany 72

Copier/Document Server Features on Main and Sub-machines1554❖ Dup. Back Pg. Stamp Pos.• The main machine follows the values that are set in it. The su

Strany 73

Copier/Document Server Features1564❖ Finisher: Punch Type• The main machine follows the values that are set in it. The sub-machinesfollows the setting

Strany 74

1575. Printer FeaturesThis chapter explains various items of [Printer Features] available in this machine.List / Test PrintThis section describes vari

Strany 75

Printer Features1585❖ PDF Configuration/Font PageYou can print the current configuration and installed PDF font list.This menu can be selected only wh

Strany 76 - Administrator Tools

List / Test Print1595Interpreting the configuration page❖ System Reference•Unit NumberDisplays the serial number assigned to the board by its manufact

Strany 77

Printer Features1605❖ Host InterfaceDisplays settings made under the Host Interface menu.When DHCP is active on the network, the actual IP address, su

Strany 78

Maintenance1615MaintenanceThis section describes various items of [Maintenance] under [Printer Features]❖ List / Test Print LockYou can Lock the [List

Strany 79

Connecting to the Interfaces91Connecting with the USB InterfaceMake the connection with the USB 2.0 interface.A Connect the USB 2.0 interface cable to

Strany 80

Printer Features1625SystemThis section describes various items of [System] under [Printer Features].❖ Print Error ReportSelect this to have an error r

Strany 81

System1635❖ Initial Print Job ListYou can set the desired type of print job list that appears on the screen whenyou press [Print Jobs].• Complete List

Strany 82

Printer Features1645❖ Spool ImageYou can select to print spool images. The print job transmitted from the com-puter is temporarily stored on the machi

Strany 83

System1655•A4•B5 JIS•A5•B6 JIS•A6•8K• 16K• Custom SizeDefault: •Metric version: A4• Inch version: 81/2×11❖ Letterhead SettingYou can rotate original i

Strany 84

Printer Features1665❖ Default Printer LanguageYou can set the default printer language if the machine cannot find the printerlanguage automatically.•

Strany 85

Host Interface1675Host InterfaceThis section describes various items of [Host Interface] under [Printer Features].Default settings are shown in bold t

Strany 86

Printer Features1685PCL MenuThis section describes various items of [PCL Menu] under [Printer Features].Default settings are shown in bold type.❖ Orie

Strany 87

PCL Menu1695❖ Symbol SetYou can specify the set of print characters for the selected font. The availableoptions are as follows:Roman-8, ISO L1, ISO L2

Strany 88

Printer Features1705PS MenuThis section describes various items of [PS Menu] under [Printer Features].Default settings are shown in bold type.This men

Strany 89

PDF Menu1715PDF MenuThis section describes various items of [PDF Menu] under [Printer Features].Default settings are shown in bold type.❖ Change PDF P

Strany 90

Connecting the Machine101Connecting to the IEEE 1394 InterfaceConnect the IEEE 1394 interface cable to the IEEE 1394 interface board (optional).A Conn

Strany 91

Printer Features1725

Strany 92

1736. Scanner FeaturesThis chapter describes various items of [Scanner Features] available in this ma-chine.General SettingsFollowing describes variou

Strany 93

Scanner Features1746❖ Destination List Display Priority 2In the machine’s address book, select which address book appears by default.You can select ei

Strany 94

Scan Settings1756Scan SettingsFollowing describes various items of [Scan Settings] under [Scanner Features].❖ A.C.S. Sensitivity LevelSets the sensiti

Strany 95

Scanner Features1766❖ Wait Time for Next Original(s): SADFWhen dividing originals and scanning them separately with the ADF to forma single file, sele

Strany 96

Send Settings1776Send SettingsThis section describes various items of [Send Settings] under [Scanner Features].❖ Compression (Black & White)Select

Strany 97

Scanner Features1786❖ Divide & Send E-mailThis function is effective only when [On] is selected for [Max. E-mail Size].Select whether or not an im

Strany 98

1797. Registering Addresses andUsers for Scanner FunctionsFollowing describes the procedure for registering the destination and the user.Address BookR

Strany 99

Registering Addresses and Users for Scanner Functions1807❖ ProtectionYou can set protection codes to stop sender's name from being used or folder

Strany 100 - Tray Paper Settings

Address Book1817❖ FolderYou can register the protocol, path name and server name.•SMB•FTP•NCP

Strany 101 - Items of Tray Paper Settings

Connecting to the Interfaces111Connecting to the IEEE 1284 InterfaceConnect the IEEE 1284 interface cable to the IEEE 1284 interface board (optional).

Strany 102

Registering Addresses and Users for Scanner Functions1827❖ Add to GroupYou can put registered e-mail and folder destinations into a group for easierma

Strany 103

Address Book1837Sending scanned files to a shared folder directlyAfter registering the path name, user name and password, you can connect to ashared f

Strany 104

Registering Addresses and Users for Scanner Functions1847Registering NamesRegister user information including their names.The user name is useful for

Strany 105 - ❖ Apply Auto Paper Select

Registering Names1857I Press [OK] twice.J Press the {User Tools} key.Note❒ The name can be used for documents in the Document Server. For detailsabout

Strany 106

Registering Addresses and Users for Scanner Functions1867H To change the title, press the key for the classification you want to use fromSelect Title.

Strany 107

Authentication Information1877Authentication InformationFollowing describes the procedure for authenticating a user code.Important❒ The functions asso

Strany 108

Registering Addresses and Users for Scanner Functions1887D Check that [Program/Change] is selected.E Press the name whose code is to be registered, or

Strany 109 - ❖ Thick Paper Setting

Authentication Information1897Changing a User CodeFollowing describes the procedure for changing a registered user code.Important❒ Even if you change

Strany 110

Registering Addresses and Users for Scanner Functions1907J Press the key to select the functions to enable them.Press the key to highlight it, and the

Strany 111

Authentication Information1917G Press [Change] to delete the user code, and then press {#} key.H Press [OK].I Press [Exit].J Press the {User Tools} ke

Strany 112

IntroductionThis manual contains detailed instructions and notes on the operation and use of this machine. For yoursafety and benefit, read this manua

Strany 113

Connecting the Machine121Connecting to the IEEE 802.11b (Wireless LAN) InterfaceConnecting to the IEEE 802.11b (wireless LAN) interface.Note❒ Check th

Strany 114

Registering Addresses and Users for Scanner Functions1927Printing the Counter for Each UserFollowing describes the procedure for printing the counter

Strany 115 - ❖ The paper sizes

Authentication Information1937F Select the function usage you want to print from [Copier Counter], [PrintCounter], and [Scanner Counter].G Press [Pri

Strany 116

Registering Addresses and Users for Scanner Functions1947Clearing the Number of PrintsFollowing describes the procedure for clearing the counter.A Pre

Strany 117 - ❖ Front Cover

Authentication Information1957G Select the function usage you want to clear from [Copier Counter], [PrintCounter], [Scanner Counter] and [All Counter

Strany 118

Registering Addresses and Users for Scanner Functions1967E-mail DestinationRegister e-mail destinations so you do not need to enter an e-mail address

Strany 119

E-mail Destination1977G Press [Change].H Enter the e-mail address.I Press [OK].J Select [E-mail].K Press [OK].Note❒ You can enter up to 128 characters

Strany 120

Registering Addresses and Users for Scanner Functions1987Changing an E-mail DestinationA Press [System Settings].B Press [Administrator Tools].C Press

Strany 121 - Features

E-mail Destination1997Using the e-mail address as the senderA Press [Protection].B Press [Sender ] under [Use Name as].Deleting an E-mail DestinationA

Strany 122

Registering Addresses and Users for Scanner Functions2007Registering FoldersBy registering a shared folder, you can send scan files to it directly.The

Strany 123 - General Features

Registering Folders2017B Press [Administrator Tools].C Press [Address Book Management].D Check that [Program / Change] is selected.E Select the name w

Strany 124 - ❖ Generation Copy

Connecting to the Interfaces131Note❒ Select [802.11 Ad-hoc] mode when connecting Windows XP as a wireless LANclient using Windows XP standard driver o

Strany 125

Registering Addresses and Users for Scanner Functions2027R Press [Exit].Note❒ To register the name, see Registering Names”.❒ You can enter a path usin

Strany 126

Registering Folders2037Using Browse Network to locate the folderA Press [Browse Network].Work groups on the same network are displayed.Network display

Strany 127

Registering Addresses and Users for Scanner Functions2047Changing a FolderA Press [System Settings].B Press [Administrator Tools].C Press [Address Boo

Strany 128 - Reproduction Ratio

Registering Folders2057To change the protocolA Press [FTP] or [NCP].B A confirmation message appears. Press [Yes].Changing the protocol will clear all

Strany 129 - ❖ R/E Ratio

Registering Addresses and Users for Scanner Functions2067Deleting a registered folderA [System Settings].B Press [Administrator Tools].C Press [Addres

Strany 130

Registering Folders2077Using FTP to ConnectNote❒ To register a shared folder configured in Windows, see “Using SMB to Connect”.❒ To register a folder

Strany 131

Registering Addresses and Users for Scanner Functions2087N Press [FTP].O A confirmation message appears. Press [Yes].P Press [Change] under Server Nam

Strany 132 - ❖ Front Margin: Top/Bottom

Registering Folders2097Z Press [Exit].Note❒ To register the name, see Registering Names”.❒ You can enter up to 128 characters for the user name.❒ You

Strany 133

Registering Addresses and Users for Scanner Functions2107D Check that [Program/Change] is selected.E Select the name whose folder you want to change,

Strany 134 - ❖ Copy Order in Combine

Registering Folders2117Changing items under FTPA Press [Change] under “Port Number”.B Enter the new port number, and then press {#}.C Press [Change] u

Strany 135

Connecting the Machine141❖ When using in ad-hoc mode / 802.11 ad-hoc mode1. If the IEEE 802.11b interface unit is working, it is lit in orange.2. If i

Strany 136 - ❖ Separation Line in Combine

Registering Addresses and Users for Scanner Functions2127J Press [Exit].Note❒ To delete a name entirely, see “Deleting a Registered Name”.Referencep.1

Strany 137 - ❖ Double Copies Position

Registering Folders2137I Enter the login user name, and then press [OK].J Press [Change] under Login Password.K Enter the password, and then press [OK

Strany 138 - Preset Stamp

Registering Addresses and Users for Scanner Functions2147To locate the folder manuallyA Press [Change] under Path.B Enter the path where the folder is

Strany 139 - ❖ Stamp Format

Registering Folders2157Changing a registered folderA Press [System Settings].B Press [Administrator Tools].C Press [Address Book Management].D Check t

Strany 140

Registering Addresses and Users for Scanner Functions2167Changing NCP settingsTo change NCP settings:A Select the type of connection.B Press [Change]

Strany 141 - User Stamp

Registering Folders2177Deleting a FolderA Press [System Settings].B Press [Administrator Tools].C Press [Address Book Management].D Check that [Progla

Strany 142 - Reference

Registering Addresses and Users for Scanner Functions2187Registering Names to a GroupYou can register names to a group to enable easy management of e-

Strany 143 - Date Stamp

Registering Names to a Group2197F Press [Change] under Group Name.G Enter the group name, and then press [OK].The Key Display name is set automaticall

Strany 144 - ❖ Stamp Setting

Registering Addresses and Users for Scanner Functions2207B Press [Administrator Tools].C Press [Address Book Management].D Check that [Program / Chang

Strany 145 - Page Numbering

Registering Names to a Group2217Adding a Groupe to Another GroupYou can add a group to another group.A Press [System Settings].B Press [Administrator

Strany 146 - ❖ Stamp Position

Network Settings151Network SettingsThis section describes the network settings you can change with User Tools (Sys-tem Settings). Make settings accord

Strany 147 - ❖ Superimpose

Registering Addresses and Users for Scanner Functions2227G Select the group which you want to add to.The group key that you have selected becomes high

Strany 148 - Stamp Text

Registering Names to a Group2237E Select the group where the members you want to check is egistered.You can search by the registered name, user code,

Strany 149

Registering Addresses and Users for Scanner Functions2247G Select the group from which you want to remove the name.The group key is deselected, and th

Strany 150 - Input/Output

Registering Names to a Group2257E Select the group that you want to delete from.Press the group key, or enter the registered number during the number

Strany 151

Registering Addresses and Users for Scanner Functions2267Changing a Group NameA Press [System Settings].B Press [Administrator Tools].C Press [Address

Strany 152 - ❖ Finisher: Punch Type

Registering Names to a Group2277Deleting a GoupA Press [System Settings].B Press [Administrator Tools].C Press [Address Book: Program / Change / Delet

Strany 153 - ❖ System Settings

Registering Addresses and Users for Scanner Functions2287Registering a Protection CodeYou can stop sender's names or folders being accessed by se

Strany 154 - Main and Sub-machines

Registering a Protection Code2297F Press [Protection].G Press [Destination] or [Sender] under Use Name as.Both [Destination] and [Sender] can be selec

Strany 155

Registering Addresses and Users for Scanner Functions2307Registering a Protection Code to a Group UserA Press [System Settings].B Press [Administrator

Strany 156

Registering SMTP and LDAP Authentication2317Registering SMTP and LDAP AuthenticationSMTP AuthenticationFor each user registered in the Address Book, y

Strany 157

Connecting the Machine161Note❒ IPv6 can be used only for the printer function.❒ In [Effective Protocol], check that the protocol you want to use is se

Strany 158

Registering Addresses and Users for Scanner Functions2327H Press [Change] under Login User Name.I Enter the login user name, and then press [OK].J Pre

Strany 159

Registering SMTP and LDAP Authentication2337LDAP AuthenticationFor each user registered in the Address Book, you can register a login user nameand log

Strany 160

Registering Addresses and Users for Scanner Functions2347H Press [Change] under Login User Name.I Enter the login user name, and then press [OK].J Pre

Strany 161

2358. Other User ToolsInitial settings allow you switch the language as well as checking the number ofprinted papers by displaying the counter.Changin

Strany 162

Other User Tools2368InquiryThe Inquiry function lets you check the telephone numbers to contact for repairs,or ordering consumables such as toner. Be

Strany 163

Inquiry2378C Press the {Start} key.The inquiry information list is printed out.D Press [Exit] twice.

Strany 164

Other User Tools2388CounterDisplaying the Total CounterYou can display the total counter value used for all functions.You can also print out a counter

Strany 165 - 5. Printer Features

Counter2398Method of CountingThe counter increments “1” for each original sheets. In duplex mode, it counts“2” for front and back of original sheet.❖

Strany 167 - List / Test Print

2419. AppendixAdjustment Settings for OperatorsChanging the Adjustment Settings for OperatorsA Press the {User Tools} key.B Press [Adjustment Settings

Strany 168 - Printer Features

Network Settings171IEEE 802.11b (wireless LAN)This section describes necessary set items for using Printer with IEEE 802.11b(wireless LAN).For details

Strany 169 - Maintenance

Appendix2429Setting ValuesFeed❖ Shift Image With Feed❖ 1-710-001 : Front Side• Max.: 2 mm• Min.: -2 mm•Step: 0.1 mm•Initial value: 0❖ 1-710-002 : Back

Strany 170

Adjustment Settings for Operators2439❖ 1-720-002 : Tray 2•Max: 2 mm•Min:-2 mm•Step: 0.1 mm•Initial value: 0❖ 1-720-003 : Tray 3•Max: 2 mm•Min:-2 mm•St

Strany 171

Appendix2449❖ Set Fusing Temparature❖ 1–740–001 : Set Fusing Temparature• 1: Raise temperature to improve fusing• 2: Lower temperature to reduce curl❖

Strany 172

Adjustment Settings for Operators2459❖ CIS Img Pos Adj: Feed Setting❖ 1-911-001 : Tray 1•0: Off•1: On❖ 1-911-002 : Tray 2•0: Off•1: On❖ 1-911-003 : Tr

Strany 173 - ❖ Edge to Edge Print

Appendix2469❖ 2-750-002 : Copy Image: Back Side• Max: 0.3 %• Min: -0.3 %•Step: 0.1 %• Initial value: 0 %❖ 2-750-003 : Print Image: Front Side• Max: 0.

Strany 174

Adjustment Settings for Operators2479Process❖ Select Test Pattern❖ 3–740–001 : Select Test Pattern• Trim Pattern❖ Reset to Defaults❖ 3–740–002 : Reset

Strany 175 - Host Interface

Appendix2489❖ 6-700-005 : B5 SEF•Max: 2 mm• Min: -2 mm•Step: 0.1 mm• Initial value: 0 mm❖ 6-700-006 : B5 LEF•Max: 2 mm• Min: -2 mm•Step: 0.1 mm• Initi

Strany 176 - PCL Menu

Adjustment Settings for Operators2499❖ Adjust Punch Hole : With Feed❖ 6-705-001 : 2-Hole: JPN•Max: 2 mm• Min: -2 mm•Step: 0.5 mm• Initial value: 0 mm❖

Strany 177

Appendix2509❖ 6-730-002 : B4 SEF• Max: 3.0 mm• Min: -3.0 mm•Step: 0.2 mm• Initial value: 0 mm❖ 6-730-003 : A4 SEF• Max: 3.0 mm• Min: -3.0 mm•Step: 0.2

Strany 178

Adjustment Settings for Operators2519❖ 6-730-009 : Custom Size• Max: 3.0 mm• Min: -3.0 mm•Step: 0.2 mm• Initial value: 0 mm❖ Adjust Booklet Fold Posit

Strany 179 - PDF Menu

Connecting the Machine181Note❒ As to [Effective Protocol], check if the protocol to use is set as [Active].❒ [IEEE 802.11b] and [LAN Type] are display

Strany 180

Appendix2529❖ 6-735-006 : DLT• Max: 3.0 mm• Min: -3.0 mm•Step: 0.2 mm• Initial value: 0 mm❖ 6-735-007 : LG• Max: 3.0 mm• Min: -3.0 mm•Step: 0.2 mm• In

Strany 181 - 6. Scanner Features

Specifications for the Main Unit2539Specifications for the Main Unit❖ Configuration:Console❖ Photosensitivity type:OPC drum (∅100)❖ Original scanning:

Strany 182 - Scanner Features

Appendix2549❖ Copy paper weight:• Tray 1 - Tray 3 : 52 - 216 g/m2, 16 lb. Bond - 80 lb. Cover• Tray 4, Tray 5 (LCIT RT5000), Tray 4 - Tray 6 (LCIT RT5

Strany 183 - Scan Settings

Specifications for the Main Unit2559❖ Reproduction ratio:Preset reproduction ratios:•EnlargementMetric version: 400 %, 200 %, 141 %, 122 %, 115 %Inch

Strany 184

Appendix2569❖ Power consumption (Type 2: 110 copies/minute model):*1Main machine with the finisher, Booklet FInisher, A3 LCIT, Multi bypass tray(Tray

Strany 185 - Send Settings

Specifications for the Main Unit2579❖ Noise emission *1 (Type 2):Sound power levelSound pressure level *2 *1The above measurements are ISO 7779 actual

Strany 186

Appendix2589Document Server❖ HDD:160 GB × 2❖ HDD (Document Server):45 GB❖ Capacity:• Copy: Approx. 3,000 sheets (ITUT-No.4 chart)• Batch mode: Approx.

Strany 187 - Users for Scanner Functions

Specifications for the Main Unit2599Auto Document Feeder❖ Mode:ADF mode, Batch mode, SADF mode, Mixed Sizes mode, Thin mode❖ Original size:•A3L–A5KL•

Strany 188 - ❖ E-mail

Appendix2609Specifications for OptionsFinisher SR5000Finisher Upper Tray: ❖ Paper size:A3L, B4L, A4KL, B5KL, A5KL, 11" × 17"L, 81/2" ×

Strany 189 - Address Book

Specifications for Options2619❖ Stack capacity after stapling• 200–30 sets (10–100 sheets) (A4KL, B5KL, 81/2" × 11"KL)(80 g/m2, 20 lb. Bond)

Strany 190 - Sending e-mail by Quick Dial

Network Settings191Note❒ As to [Effective Protocol], check if the protocol to use is set as [Active].❒ [LAN Type] is displayed when optional wireless

Strany 191

Appendix2629❖ Dimensions (W × D × H):600 × 730 × 980 mm, 23.6” × 28.7” × 38.6” inch❖ Weight:Approx. 70 kg, 152.4lbNote❒ Specifications are subject to

Strany 192 - Registering Names

Specifications for Options2639Punch Unit PU5000To use the Punch Unit PU5000, the Finisher SR5000 or the Booklet FinisherBK5000 are required.❖ Paper si

Strany 193

Appendix2649Z-folding Unit ZF4000To use the Z-folding Unit ZF4000, the Booklet Finisher BK5000 is required.❖ Paper size:A3L, B4JISL, A4KL, B5KL, 11&qu

Strany 194 - Deleting a Registered Name

Specifications for Options2659LCIT RT5010A3 Large Capacity Tray❖ Paper size:Length: A5K / 81/2" × 51/2"K – 19”Width: A5L / 81/2" × 51/2

Strany 195 - Authentication Information

Appendix2669❖ Weight:Approx. 18 kg (39.7 lb) or lessNote❒ Specifications are subject to change without notice.Others❖ A3 / 11" × 17" Tray Un

Strany 196

Information about Installed Software2679Information about Installed Softwareexpat• The software including controller, etc. (hereinafter "software

Strany 197

Appendix2689NetBSD1. Copyright Notice of NetBSDFor all users to use this product:This product contains NetBSD operating system:For the most part, the

Strany 198 - Deleting a User Code

Information about Installed Software26992.Authors Name ListAll product names mentioned herein are trademarks of their respective owners.The following

Strany 199

Appendix2709SablotronSablotron (Version 0.82) Copyright © 2000 Ginger Alliance Ltd. All Rights Re-serveda) The application software installed on this

Strany 200 - A Press [System Settings]

Information about Installed Software2719SASLCMU libsaslTim MartinRob EarhartRob SiemborskiCopyright (c) 2001 Carnegie Mellon University. All rights re

Strany 201

Connecting the Machine201Note❒ [IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.❒ As to [Effective Protocol], check if th

Strany 202 - Clearing the Number of Prints

Appendix2729MD4Copyright (C) 1990-2, RSA Data Security, Inc. All rights reserved.License to copy and use this software is granted provided that it is

Strany 203 - K Press [OK]

Information about Installed Software2739Samba(Ver 3.0.4)For SMB transmission, this machine uses Samba ver 3.0.4 (hereinafter referred toas Samba 3.0.4

Strany 204 - E-mail Destination

Appendix2749Open SSLCopyright (c) 1998-2004 The OpenSSL Project. All rights reserved.Redistribution and use in source and binary forms, with or withou

Strany 205 - J Select [E-mail]

Information about Installed Software2759This product includes cryptographic software written by Eric Young([email protected]). This product includes s

Strany 206

Appendix2769THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EX-PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE IMPL

Strany 207

Information about Installed Software2779[However, none of that term is relevant at this point in time. All of these restric-tively licenced software c

Strany 208 - Registering Folders

Appendix2789NO WARRANTYBECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NOWARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLI-CABLE LAW

Strany 209

Information about Installed Software27993)One component of the ssh source code is under a 3-clause BSD license, held bythe University of California, s

Strany 210 - C Press [OK]

Appendix2809Jason DownsSolar DesignerTodd C. MillerRedistribution and use in source and binary forms, with or without modifica-tion, are permitted pro

Strany 211

Information about Installed Software28191. Redistributions of source code must retain the above copyright notice, this listof conditions and the follo

Strany 212 - Changing a Folder

Network Settings211Note❒ As to [Effective Protocol], check if the protocol to use is set as [Active].❒ [LAN Type] is displayed when optional wireless

Strany 213 - C Enter each items again

Appendix2829THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION ANDITS CONTRIBUTORS ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRAN-TIES, INC

Strany 214 - Deleting a registered folder

283INDEXAAbout Address Book, 179Accessing User Tools (System Settings), 3A.C.S. Sensitivity Level, 175Address BookChange Order, 68Edit Title,

Strany 215

284DDark Background, 113Data Format, 170Date Stamp, 135DDNS Configuration, 52DDNS Configuration (IEEE 1394), 57Default Printer Language, 1

Strany 216

285Input Prime, 56Inquiry, 236Insert Separation Sheet, 142Interface Settings / System Settings, 52Interleave Print, 43Interpreting the confi

Strany 217 - Z Press [Exit]

286Print Address BookDestination List, 68Print & Delete Scanner Journal, 173Printer Auto Reset Timer, 49Printer Features / Host Interface,

Strany 218 - To change the protocol

287Settings Required to Use Network TWAIN Scanner / IEEE 802.11b (wireless LAN), 30Settings Required to Use Scan to Folder Function, 22Settings Re

Strany 219

288 EN USA D102-7572UUpdate Delivery Server Destination List, 173User Authentication Management, 68User Code, 187User Stamp, 133Using SMB to C

Strany 220 - Using NCP to Connect

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:a means POWER ON.c means STAND BY.TrademarksMicrosoft®

Strany 221

Operating Instructions General Settings GuideType for Pro 906EXType for Pro 1106EXType for Pro 1356EXEN USA D102-7572

Strany 222 - To locate the folder manually

iManuals for This MachineRefer to the manuals that are relevant to what you want to do with the machine.❖ About This MachineBe sure to read the Safety

Strany 223

Connecting the Machine221Settings Required to Use Scan to Folder FunctionThis section describes necessary set items for sending file.EthernetThis sect

Strany 224 - Changing NCP settings

Network Settings231IEEE 1394 (IPv4 over 1394)This section describes necessary set items for sending file with IEEE 1394 inter-face cable.For details a

Strany 225

Connecting the Machine241IEEE 802.11b (wireless LAN)This section describes necessary set items for sending file with IEEE 802.11b(wireless LAN).For de

Strany 226 - Registering Names to a Group

Network Settings251Settings Required to Use the Network Delivery ScannerThis section describes necessary set items for delivering data to network.Ethe

Strany 227

Connecting the Machine261IEEE 1394 (IPv4 over 1394)This section describes necessary set items for delivering data to network withIEEE 1394 interface c

Strany 228

Network Settings271IEEE 802.11b (wireless LAN)This section describes necessary set items for delivering data to network withIEEE 802.11b (wireless LAN

Strany 229

Connecting the Machine281Settings Required to Use Network TWAIN ScannerThis section describes necessary set items for using TWAIN Scanner under thenet

Strany 230

Network Settings291IEEE 1394 (IPv4 over 1394)This section describes necessary set items for using network TWAIN Scannerwith IEEE 1394 interface cable.

Strany 231

Connecting the Machine301IEEE 802.11b (wireless LAN)This section describes necessary set items for using network TWAIN Scannerwith IEEE 802.11b (wirel

Strany 232

Network Settings311Settings Required to Use Document ServerThis section describes necessary set items for using Document Server functionunder the netw

Strany 233 - F Press [Add to Group]

ii❖ Other manuals• PostScript3 Supplement•UNIX Supplement• Manuals for DeskTopBinder Lite• DeskTopBinder Lite Setup Guide• DeskTopBinder Introduction

Strany 234 - Changing a Group Name

Connecting the Machine321IEEE 1394 (IPv4 over 1394)This section describes necessary set items for using Document Server functionwith IEEE 1394 interfa

Strany 235

Network Settings331Note❒ As to [Effective Protocol], check if the protocol to use is set as [Active].❒ [IEEE 802.11b] and [LAN Type] are displayed whe

Strany 236 - Registering a Protection Code

Connecting the Machine341Interface SettingsChange set values of [Interface Settings] in [System Settings] of this machine by us-ing Web Image Monitor,

Strany 237

Network Settings351❖ [Network]→[DNS Configuration]→[Specify]→[DNS Server1-3]• Web Image Monitor:Can be used for specifying the setting.• SmartDeviceMo

Strany 238

Connecting the Machine361❖ [Network]→[Effective Protocol]→[NetWare]• Web Image Monitor:Can be used for specifying the setting.• SmartDeviceMonitor for

Strany 239 - SMTP Authentication

Network Settings371❖ [Network]→[NW Frame Type]→[Ethernet SNAP]• Web Image Monitor:Can be used for specifying the setting.• SmartDeviceMonitor for Admi

Strany 240

Connecting the Machine381❖ [Network]→[Host Name]• Web Image Monitor:Can be used for specifying the setting.• SmartDeviceMonitor for Admin:Can be used

Strany 241 - LDAP Authentication

Network Settings391❖ [IEEE 1394]→[WINS Configuration]→[Scope ID]• Web Image Monitor:Can be used for specifying the setting.• SmartDeviceMonitor for Ad

Strany 242

Connecting the Machine401❖ [File Transfer]→[Delivery Option]• Web Image Monitor:Can be used for specifying the setting.• SmartDeviceMonitor for Admin:

Strany 243 - 8. Other User Tools

Network Settings411❖ [File Transfer]→[Administrator's E-mail Address]• Web Image Monitor:Can be used for specifying the setting.• SmartDeviceMoni

Strany 244 - B Press [Print Inquiry List]

iiiTABLE OF CONTENTSManuals for This Machine ...iHow to Read This M

Strany 245 - D Press [Exit] twice

Connecting the Machine421❖ [File Transfer]→[Default User Name/Password (Send)]→[FTP Password]• Web Image Monitor:Can be used for specifying the settin

Strany 246 - A Press {Counter} key

432. System SettingsThis chapter describes various items of [System Settings] available in this ma-chine.General FeaturesThis section describes variou

Strany 247 - Method of Counting

System Settings442❖ Warm–up Beeper (copier/Document Server)You can have the beeper sound when the machine becomes ready to copy af-ter leaving Energy

Strany 248 - Other User Tools

General Features452❖ Interleave PrintYou can set the timing for functions to switch when [Print Priority] has been setto [Interleave].Default: 10 shee

Strany 249 - 9. Appendix

System Settings462❖ Output: Document Server (Document Server)You can specify a tray to which documents are delivered.•Finisher AFE• Finisher Upper Tra

Strany 250 - Appendix

General Features472❖ System Status/Job List Display TimeYou can specify how long to display the System Status and Job List displayfor.• On•OffBy selec

Strany 251

System Settings482❖ Z-fold positionSet the folding-back position in units of 1 mm when you specify Z-folding.The machine is shipped from the factory w

Strany 252

Timer Settings492Timer SettingsThis section describes various items of [Timer Settings] under [System Settings].❖ Auto Off TimerAfter a specified peri

Strany 253

System Settings502❖ Printer Auto Reset Timer (printer)Specifies the time to elapse before the printer function resets.• On•OffThe time can be set from

Strany 254

Timer Settings512❖ Weekly Timer: Monday-SundaySet the time to turn on/off the power for each day of the week. •Power On Time•Power Off TimeEnter the P

Strany 255

iv3. Tray Paper SettingsTray Paper Settings ...89Changing Tr

Strany 256

System Settings522Interface SettingsThis section describes various items of [Interface Settings] under [System Settings].NetworkThis section describes

Strany 257

Interface Settings532❖ IPv6 Stateless Address AutoconfigurationYou can set “IPv6 Stateless Address Autoconfiguration” to “Active” or “Inactive”.• Acti

Strany 258

System Settings542❖ NCP Delivery ProtocolSelect the protocol for NCP delivery.•IPX Priority• TCP/IP Priority•IPX Only•TCP/IP Only❖ NW Frame TypeSelect

Strany 259

Interface Settings552❖ LAN TypeWhen you have installed the optional IEEE 802.11b interface unit, select inter-face, IEEE 802.11b (wireless LAN) or Eth

Strany 260

System Settings562Parallel InterfaceThis section describes various items of [Parallel Interface] under [Interface Settings].[Parallel Interface] is di

Strany 261

Interface Settings572IEEE 1394This section describes various items of [IEEE 1394] under [Interface Settings].[IEEE 1394] is displayed when this machin

Strany 262 - ❖ Copying speed:

System Settings582❖ WINS ConfigurationYou can specify the WINS server settings.If [On] is selected, specify the [WINS Server] IP address as “xxx.xxx.x

Strany 263 - ❖ Copy paper capacity:

Interface Settings592IEEE 802.11bThis section describes various items of [IEEE 802.11b] under [Interface Settings].[IEEE 802.11b] is displayed when th

Strany 264

System Settings602❖ Transmission SpeedSpecifies the communication speed of the IEEE 802.11b (wireless LAN).• Auto Select• 11Mbps Fixed• 5.5Mbps Fixed•

Strany 265

Interface Settings612D Press the {Start} key.The configuration page is printed.E Press [Exit].F Press the {User Tools} key.Note❒ You can also exit by

Strany 266 - Document Server

v7. Registering Addresses and Users for Scanner FunctionsAddress Book...

Strany 267 - Auto Document Feeder

System Settings622File TransferThis section describes various items of [File Transfer] under [System Settings].❖ Delivery OptionEnables or disables se

Strany 268 - Specifications for Options

File Transfer632❖ SMTP AuthenticationYou can configure SMTP authentication (PLAIN, LOGIN, CRAMMD5, DI-GEST-MD5).When sending e-mail to an SMTP server,

Strany 269 - Booklet Finisher BK5000

System Settings642❖ Reception ProtocolSpecify Reception Protocol for the function "Auto E-mail Notification". Fordetails about the function

Strany 270 - Cover Interposer Tray CI5010

File Transfer652❖ E-mail Reception IntervalSpecify, in minutes, the time interval for the function "Auto E-mail Notifica-tion" via POP3 or I

Strany 271 - Punch Unit PU5000

System Settings662❖ Program/Change/Delete E-mail MessageYou can program, change, or delete the e-mail message used when sendingscan file as an attachm

Strany 272 - LCIT RT5000

File Transfer672❖ Scanner Resend Interval TimeSpecifies the interval the machine waits before resending scan file, if they can-not be sent to the deli

Strany 273 - LCIT RT5010

System Settings682Administrator ToolsThis section describes various items of [Administrator Tools] under [System Set-tings].Administrator Tools are us

Strany 274

Administrator Tools692❖ Address Book: Program/Change/Delete GroupNames registered in the Address Book can be added into a group.You can then easily ma

Strany 275

System Settings702D Press the name key to be move.You can select a name using the number keys.E Press the name key in the place you want to move to.Th

Strany 276

Administrator Tools712❖ Print Address Book: Destination ListYou can print the destination list registered in the Address Book.•Print in Title 1 OrderP

Strany 277

vi9. AppendixAdjustment Settings for Operators ...241Changing the Adjustment Settings f

Strany 278

System Settings722E Enter the new name, and then press [OK].F Press [OK].❖ Address Book: Switch TitleSpecifies the title to select a name.• Title 1• T

Strany 279

Administrator Tools732•Scanner Counter• Print Counter List for All UsersPrints the counter values for all the users.• Clear Counter for All UsersSets

Strany 280

System Settings742❖ Program/Change AdministratorFor details about this function, consult your administrator.❖ Key Counter ManagementYou can specify th

Strany 281 - RSA BSAFE

Administrator Tools752❖ Program / Change / Delete LDAP ServerProgram the LDAP server to find up e-mail destinations in the LDAP serverAddress Book dir

Strany 282

System Settings762• DeleteA Press [System Settings].B Press [Administrator Tools], and then press [TNext] twice.C Press [Program/Change/Delete LDAP Se

Strany 283

Administrator Tools772Program / Change / Delete LDAP ServerThis section explains how to specify the LDAP server settings.To program / change the LDAP

Strany 284

System Settings782Programming the LDAP serverThis section explains how to specify the LDAP server settings.To enter an identification nameA Press [Cha

Strany 285

Administrator Tools792To enter a port numberA Press [Change] under ““Port No.”.Specify the port number for communicating with the LDAP server. Specify

Strany 286

System Settings802To enter the user name and passwordA Press [Change] under “Name”. When [On] or [High Security] is selected for the authentication se

Strany 287

Administrator Tools812To set search conditionsA Press [TNext] twice.B Press [Change] for items you want to use as search conditions from the fol-lowin

Strany 288

1How to Read This ManualSymbolsThis manual uses the following symbols:Indicates important safety notes.Ignoring these notes could result in serious in

Strany 289 - Open LDAP

System Settings822E Enter the key display, and then press [OK].The registered “key display” appears as a keyword for searching LDAP.• Without key disp

Strany 290

System Settings on Main and Sub-machines832System Settings on Main and Sub-machinesThis section explains the System Settings on the two machines durin

Strany 291

System Settings842❖ Interleave Print• The set values of the main and sub-machines do not affect the combinedcopying. ❖ Output: Copier• The main and su

Strany 292

System Settings on Main and Sub-machines852❖ Power Off Timer• The set values of the main and sub-machines do not affect the combinedcopying. • In Conn

Strany 293

System Settings862Administrator ToolsHow the defaults in the Administrator Tools of copying of the main and sub-ma-chines are used in combined copying

Strany 294

System Settings on Main and Sub-machines872❖ Enhanced Authentication Management• The main machine follows the values that are set in it. The set value

Strany 295

System Settings882❖ Firmware Version• The set values of the main and sub-machines do not affect the combinedcopying. ❖ Network Security Level• The set

Strany 296 - 288 EN USA D102-7572

893. Tray Paper SettingsThis section describes various items of {Tray Paper Settings} available in this ma-chine. If the specified paper size differs

Strany 297

Tray Paper Settings903C Change settings, and then press [OK].Quitting Tray Paper SettingsThis section describes how to change the settings of Tray Pap

Strany 298 - EN USA D102-7572

Items of Tray Paper Settings913Items of Tray Paper SettingsDefault settings are shown in bold type.❖ Tray 1You can set the display to show the type of

Komentáře k této Příručce

Žádné komentáře